|Product SKU||NTL 10B-F|
When connecting with wires, wire end ferrules must be used.
Important note: The contact system of the regulator is subjected to environmental influences, thus the contact
resistance may change. This can lead to a voltage drop and/or self-heating of the contacts.
• Large setting range
• Small size
• Simple to mount
• High switching performance
NTL 10B-F: Thermostat (normally open); contact maker for regulating of filter fans and heat exchangers or for switching signal devises when temperature limit has been exceeded. The contact closes when the temperature is rising.
Switch temperature difference: +/-5°C
Sensor element: thermostatic bimetal
Contact type: snap-action contact
Service life: >100,000 cycles
Max. switching capacity:
250VAC, 10 (2) A / 120VAC, 15 (2) A
DC 30W at 24VDC to 72VDC
Max. inrush current: AC 16A for 10 sec.
Connection: 2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm² (AWG 14) stranded wire¹ 1.5mm² (AWG 16)
Mounting: clip for 35mm DIN rail, EN 60715
Casing: plastic according to UL94 V-0, light grey
Dimensions: 60 x 33 x 43mm
Weight approx.: 40g
Fitting position: variable
Operating/Storage temperature: -45 to +80°C (-49 to +176°F)
Operating/Storage humidity: max. 90% RH (non-condensing)
Protection type: IP20
Examples of Connection
1 x thermostat